Skip Navigation
  1. BlackBerry Docs
  2. CylanceHYBRID
  3. CylanceHYBRID Administration Guide
  4. Installing the CylanceHYBRID application
  5. Initial setup of the CylanceHYBRID application

Initial setup of the
CylanceHYBRID
 application

Once you have installed the
CylanceHYBRID
 application, you need to perform the following configuration steps.
  1. In a browser, enter the Kotsadm address and press
    Enter
    . An example address could be
    http://192.0.2.124:8800
    .
  2. Click
    Continue to Setup
    . You might receive a connection warning. Proceed to the
    CylanceHYBRID
     console certificate and key upload page.
    For secure communication with the
    CylanceHYBRID
     console, you can upload your own SSL certificate and private key, or you can use the self-signed TLS certificate provided by the console. If you upload your certificate and key, it can be the same one that is used to install the
    CylanceHYBRID
     application. Do one of the following:
    1. If you enter a host name, upload a private key, and upload an SSL certificate, click
      Upload & continue
      . You can also use this certificate and key when you install the
      CylanceHYBRID
       application. The host name should be the fully qualified domain name that matches the SSL certificate (for example:
      login.hybrid.com
      ).
    2. If you do not want to upload a certificate and key, click
      Skip & continue
      . A self-signed TLS certificate that is provided by the console is used.
  3. Enter the Kotsadmin login password that you noted down at the end of the installation procedure (either Step 8 in Install the CylanceHYBRID application while connected to the Internet or Step 13 in Install the CylanceHYBRID application using a downloaded setup file) and click
    Log in
    .
  4. Drag and drop your license file (.yaml), or browse to it and select it.
  5. Click
    Upload license
    .
  6. Select your
    CylanceOPTICS
     client option and click
    Continue
    .
  7. Verify your preflight checks and click
    Continue
    . The Application page is displayed. Your
    CylanceHYBRID
     application is installed.
  8. To see the status of the installation, check the readiness status in the Application information card. When the
    CylanceHYBRID
     application is ready, click the
    CylanceHYBRID
     button to launch the Status page.
To configure the
CylanceHYBRID
 application, see Configuring the CylanceHYBRID application.