Configure a SIP trunk security profile
You must configure a SIP trunk security profile for each BlackBerry Mobile Voice System telephony connector. For example, in a single site, single MVS Session
Manager model, only one SIP trunk, and therefore only one SIP trunk security profile, is required. In a single site that is configured for BlackBerry MVS MVS high availability, two SIP trunks are required, one for each MVS Session
Manager, but only one SIP trunk security profile is required. If the organization has two sites that are configured for BlackBerry MVS high availability, four SIP trunks and two SIP trunk security profiles are required.
|
Field
|
Suggested setting
|
Setting for your organization's PBX
|
|
Name
|
This field specifies a name that defines what the
Cisco Unified Communications
Manager uses the
SIP trunk security profile for (for example, MVS_6060 for the SIP trunk
security profile for
the
BlackBerry MVS).
|
|
|
Device Security Mode
|
This field specifies a
mode for the
BlackBerry MVS security profile only.
Select: Non Secure
|
|
|
Incoming Transport Type
|
Select:
TCP+UDP
|
|
|
Outgoing Transport Type
|
Select:
UDP
|
|
|
Incoming Port
|
The port number you specify here is the BlackBerry MVS Telephony Connector Trunk Port. The default Telephony Connector Trunk Port number is 6060.
Each SIP
trunk requires a unique IP address and UDP port.
SIP trunks accept incoming requests only from a source that has the
destination address that you
configure in the SIP trunk (which is the IP address of the
BlackBerry MVS Server) in combination with the incoming port number configured here.
|
|
Was this information helpful? Send us your comments.
