Create a telephony connector for communication with a PBX
-
In the
MVS Console, in the left pane, expand
Telephony Connectors.
-
Click
Add.
-
In the
Display Name field, type a name for the
telephony connector.
-
In the
Type list, click the type of telephony
connector that your organization uses.
-
In the
IP Address field, type the IP address of your
organization's telephony connector.
-
In the
Line Port field, type the UDP port number that
the PBX uses for SIP communications that are made on behalf of a specific
telephone extension within your organization.
This field only appears for some PBX types.
-
In the
Trunk Port field, type the UDP port number
that the PBX uses for general SIP communications.
-
In the
Host Name field, type the host name or FQDN of
the PBX. The default host name is the IP address.
-
In the
Registration Timeout field, type a time, in
seconds, for how frequently
BlackBerry
devices register with the PBX.
- Select Early Media Negotiation if your organization's telephony infrastructure requires early media negotiation. For more information, refer to the online help.
-
In the
PBX Initiated Calling section, in the
Number field, type an ANI number for the PBX.
Click
Add.
-
In the
Location list, click the location of your
organization's telephony connector if this feature is required.
The Location feature provides phone number normalization. The feature translates the globally unique E.164 number starting with a "+" to a locally significant number based on the location you select from the list. Normalization is applied to the called number of outgoing external calls that start with a plus sign. Use this feature when your organization's PBX does not support the plus sign or add the prefixes automatically.
-
Click
Save.
Was this information helpful? Send us your comments.
